HydraMaster CTS 403 Flex, Owner'S Manual

Page: 25 / 140

Operating Instructions: 2-4
STARTUP PROCEDURE - TILE
1. Connect fresh water to Fresh Water Supply inlet.
The inlet water may require a pressure reducing valve in cases where the water
pressure is higher than 85 psi.
2. Connect solution hose to tile solution outlet and desired cleaning tool.
The water box must be full prior to starting the truckmount.
3. Turn the key to “START”. Pull the choke and start with the throttle in IDLE position.
4. After the engine starts, push the choke in.
5. Adjust the throttle to full throttle.
6. Select “TILE CLEANING” on the Solution Control switch (see Figure 2-3).
Figure 2-3. Select “TILE” on Solution Control Switch
LTR REVISION DESCRIPTION CODE DATE BY CHKD APPVD
D
C
B
A
A
B
C
D
1 2 3 4 5 6 7 8
8
7 6
5
4 3 2 1
E
F
E
F
MACHINE
FINISH
125
SCALE: 1:4 SHEET 1 OF 1
PROPRIETARY INFORMATION
11015 47th Avenue West,
Mukilteo, Washington 98275
D
SIZE
BREAK ALL SHARP EDGES 0.005-.015
UNLESS OTHERWISE NOTED
DIMENSIONS ARE IN INCHES
PART NUMBER
WEIGHT: APPLICATION
NEXT ASSY USED ON
610-018-749
REV
ASSEMBLY, DASH - CTS 403 FLEX
PRJ000245
CTS 403 FLEX 610-050-749
- - - - - -
- - - - - -
- - -
- - -
- - - - - -
M.B.B.
M.B.B.
L.O.L. DRAWN
CHECKED
APPVD
12/18/2019
12/19/2019
12/19/2019
TOLERANCES
.X= .1
.XX= .03
.XXX= .010
ANGULAR = 2°
CODE: 21.09
TILE
Selection