HydraMaster CTS 403 Flex, Owner'S Manual

Page: 31 / 140

Freeze Guard: 3-2
FREEZE GUARDING THE CARPET/UPHOLSTERY SYSTEM
1. Connect a solution line to Carpet/Uph. Cleaning Solution Outlet with the tool of your
choice attached at the end.
2. Place the tool into a container to collect the solution from the tool.
3. Pour 2 gallons of 50/50 antifreeze and water into each Flex tank.
4. Turn the ignition switch to the “ON” position.
5. Turn switch to Carpet/Upholstery cleaning and squeeze the trigger on the tool until
antifreeze starts to come out of the tool.
6. Select “OFF” on the Solution Control switch.
Before filling the Flex tanks with chemical and starting the next cleaning job, drain
the antifreeze completely from the Flex tanks and run water though the pumps
until clear water drains from the machine.
WHEN DISPOSING OF USED ANTIFREEZE COOLANT: Follow local laws
and regulations. If required, dispose at facilities licensed to accept household
hazardous waste. If permitted, dispose in sanitary sewer systems. Do not discard
into storm sewers, septic systems, or onto the ground.
This warning appears on the label of one brand of antifreeze:
“HARMFUL OR FATAL IF SWALLOWED. Do not drink antifreeze coolant or
solution. If swallowed, induce vomiting immediately. Call a physician. Contains
Ethylene Glycol which caused birth defects in animal studies. Do not store in
open or unlabeled containers. KEEP OUT OF REACH OF CHILDREN AND
ANIMALS.”