HydraMaster CTS 403 Flex, Owner'S Manual

Page: 14 / 140

1-9: General Information
Installation Responsibilities
• Ensure proper payload capacity. It is the distributor’s responsibility to verify that the
equipment package does not exceed the vehicle capacity.
• Ensure installation of a safe fuel tap system and through-floor fittings as provided by
HydraMaster.
• Proper placement of the truckmount, recovery tank, fresh water tank, and accessories
in the vehicle and securing them with bolts and back up plates. The distributor should
verify that the owner is in agreement with the layout.
• Ensure proper connection of the fuel lines.
• Ensure proper connection and installation of the battery. Verify that the battery is in
accordance with HydraMaster’s recommendation.
• Check the pump, vacuum blower and engine oil levels prior to starting the truckmount.
• Start and run the truckmount and check that all systems function properly.
• Test all hoses, wands, etc. for correct operation.
• Ensure timely return of the document package.
Training
The distributor should provide a thorough review of the operation manual with the
purchaser along with instruction and familiarization in:
• How all the truckmount’s systems function.
• All safety precautions and their importance.
• How to correctly start and shut down the truckmount.
• How to correctly clean with the truckmount.
• Where and how often to check and change component oil levels.
• Freezing damage and how to avoid it. This includes explaining proper freeze guarding
procedures.
• How to do basic troubleshooting of the truckmount.
• Hard water damage and how to avoid it. This includes how to determine if hard water
exists in your area and the installation and use of water softening systems.
• The truckmount’s warranty and warranty procedures.