HydraMaster CTS 403 Flex, Owner'S Manual

Page: 7 / 140

General Information: 1-2
The truckmount portion of the CTS 403 Flex has been purposely modified to control the
Flex System, ensuring that the two systems work seamlessly with each other.
The truckmount system utilizes an internal combustion engine to provide the power
necessary to turn both a blower (also referred to as a vacuum pump) and a high pressure
water pump.
The heat of the engine and blower exhausts is transferred to the cleaning solution in the
heat exchanger of the system.
The solution is recovered by the vacuum generated by the blower and is collected in the
recovery tank for proper disposal.
This Owner’s Manual provides operating instructions as well as information required
for proper maintenance and troubleshooting of the CTS 403 Flex. In addition, assembly
illustrations and parts ordering information are included for your convenience.
It is the purpose of this Manual to help you properly understand and maintain your CTS 403
Flex system. Follow the directions and maintenance recommendations carefully, and you
will be rewarded with years of profitable, trouble-free operation.
It is imperative that no section be overlooked when preparing for operation of this
equipment. Please read this Owner’s Manual to familiarize yourself with the operation of
the CTS 403 Flex System, paying special attention to all Warnings and Cautions.
This section of the manual contains the following helpful information:
„
Contact Information
„
Warnings, Cautions And Notices
„
Machine Specifications - Truckmount
„
Machine Specifications - Flex Assemblies
„
Responsibilities
„
Hard Water Precautions
„
Waste Water Disposal Advisory