HYDAC International AquaSensor AS 8000 Series, Operating Manual

Page: 9 / 32

AquaSensor - AS 8000 series
1.2.1. Basic Symbols
This symbol designates safety instructions whose non-observance may pose
a hazard to individuals.
This symbol denotes safety precautions, the non-observance of which can
endanger persons by electrical shock.
This symbol provides important instructions and tips for the proper handling
and operation of the AS 8000.
Non-adherence to these instructions may result in damage to the AS 8000 or
in damage to its immediate surroundings.
This symbol indicates tips for usage and other particularly useful information.
This information helps you to optimally utilize all the features offered by your
AS 8000.
1.3. Proper/Designated Use
The AquaSensor AS 8000 was developed for the continuous monitoring of free water in
hydraulic systems.
By analyzing the amount of free water, quality standards can be verified and documented,
and the requisite optimization measures can be implemented.
Any other use shall be deemed to be improper and not in keeping with the product's
designated use.
Proper or designated use of the product extends to the following:
•
Maintaining adherence to all the instructions contained herein.
1.4. Improper Use
Any use deviating from the proper/designated use described above is prohibited.
Improper use may result in hazard to life and limb.
1.5. Informal Safety Precautions
Make sure to always keep the operating instructions in the vicinity of the product.
Apart from the operating instructions, any and all general and local regulations pertaining to
accident prevention and environmental protection are to be made available and observance
to be maintained to them.
Make sure to keep the safety and hazard symbols and warnings on the AS 8000 in a legible
condition.
Check the AquaSensor and its connection fittings daily for impermeability (visual check).
The electrical components of the AS 8000 are to also be regularly checked (visual check
once a month). Any loose connections or damaged cables are to be replaced immediately.
HYDAC Filtertechnik GmbH
en
Page 9
BeWa AS8000 3215331b en.doc 2007-07-12