AquaSensor - AS 8000 series
HYDAC Filtertechnik GmbH
en
Page 8
BeWa AS8000 3215331b en.doc
2007-07-12
1
General Safety Precautions
There are no particular dangers inherent in the measurement equipment. Damage to the
measurement cable will cause the sensor to break down, but there are no dangers of
electrical shock.
1. General Safety Guidelines
These operating instructions contain the key instructions for properly and safely operating the
AS 8000.
1.1. Obligations and Liability
•
The basic prerequisite for the safe and proper handling and operation of the AS 8000 is
knowledge of the safety instructions and warnings.
•
These operating instructions in general, and the safety precautions in particular, are to be
adhered by all those who work with the AS 8000.
•
Adherence is to be maintained to pertinent accident prevention regulations applicable at
the site where the product is used.
•
The safety precautions listed herein are limited solely to using the AS 8000.
The AS 8000 is designed to comply with latest technological and safety standards.
Nevertheless, hazards may be posed to the life and limb of the individual using the unit or to
third parties. Risk of damage may be posed to the unit or other equipment and property. The
AS 8000 is only to be used as follows:
•
for the specified correct usage
•
only when in a safe, perfect condition
•
Any faults or malfunctions which might impair safety are to be properly repaired or
remedied immediately.
Our General Terms and Conditions apply. They are made available to the owner upon
concluding purchase of the unit at the latest. Any and all warranty and liability claims for
personal injuries and damage to property shall be excluded in the event they are attributable
to one or more of the following causes:
•
Improper use of the AS 8000
•
Improper assembly, installation, commissioning, operation and maintenance of the AS
8000
•
Operating the AS 8000 when the system equipment or systems are defective
•
Modifications to the AS 8000 made by the user or purchaser
•
improper monitoring of unit components subject to wear and tear
•
improperly performed repair work
1.2. Explanation of Symbols and Warnings
The following designations and symbols are used in this manual to designate hazards, etc.:
Summary of Contents for AquaSensor AS 8000 Series
Page 1: ...AquaSensor AS 8000 series Operating Manual Doc 3215331b ...
Page 29: ...Notes ...
Page 30: ...Notes ...
Page 31: ...Notes ...
