HYDAC International AquaSensor AS 8000 Series, Operating Manual

Page: 11 / 32

AquaSensor - AS 8000 series
HYDAC Filtertechnik GmbH
en
Page 11
BeWa AS8000 3215331b en.doc 2007-07-12
1.8. Electrical Hazards
Any work involving the power supply may only be done by a properly trained, certified
electrician.
Make sure to check the electrical equipment of the product on a regular basis. Any loose or
scoured cables are to be remedied/replaced immediately.
If work on live components is required, a second individual should be present to switch off
the unit if necessary.
1.9. Maintenance, Servicing and Troubleshooting
Regular inspections are not necessary. When servicing and installing the units, you should
check for damages to the connections and cables.
When performing any maintenance, servicing, inspection or repair work, disconnect the AS
8000 from the power supply and ensure that it cannot be switched back on inadvertently.
Check any screwed fittings which have been removed to see that they have been properly
resecured.
1.10. Modifications to the AS 8000
Do not make any modifications (design modifications, extensions) to the AS 8000 without the
prior consent of the manufacturer.
Any design modifications or extensions may not be made without HYDAC Filtertechnik
GmbH’s express prior written approval.
Only use original (OEM) spare parts and consumables. When using non-OEM components,
it cannot be ensured that they have been designed and manufactured so as to comply with
loading and safety requirements.
2 Storage and Transport
There are no special precautions for transporting and storing the unit. For longer storage
periods, it should be kept dry and protected from frost.