AquaSensor - AS 8000 series
7.2.2.1
System constants menu - sensor
The parameters for the emulsion being monitored are transferred in a table of values. In the
pure components A and B, the sensor variables are set for three temperatures. Additional
variables are measured for certain mixtures of components A and B.
A security recognition can be set in the table for the Sensor, Control Unit and Installation.
The temperatures being measured, as well as the temperature measuring range, are entered
in the first line. The lowest and highest temperature values also limit the measuring range of
the sensor. For measurements outside of this range, an error message will appear.
Fig. 8
Fig. 9
HYDAC Filtertechnik GmbH
en
Page 25
BeWa AS8000 3215331b en.doc
2007-07-12
Summary of Contents for AquaSensor AS 8000 Series
Page 1: ...AquaSensor AS 8000 series Operating Manual Doc 3215331b ...
Page 29: ...Notes ...
Page 30: ...Notes ...
Page 31: ...Notes ...
