HYDAC International AquaSensor AS 8000 Series, Operating Manual

Page: 23 / 32

AquaSensor - AS 8000 series
7.2 Operating
For a display of the current settings in the main view, the current measured values, and the
board temperature, see figure 5:
Sensor 1
Alarm Level [Comp - B] here at 30%
Comp – B Content , here at 4.5%
Temperature , here 74°C
Sensor O.K. !
other possible displays are the error messages from the sensors.
Press <Strg><p> to call up the parameter, figure 6 Press<Strg><s> to call up the
system constants, figure 8 Press < ESC > to restart the program, reload the screen, and
start a readout of new values.
Press <Strg>< t > to show the measured values of the sensors. With these values, the
parameterizing of the sensors can take place. The percentage of component B is shown to
two decimal places after the comma. Likewise, the current values as well as the averaged
measured values are shown. If a zero correction has been performed, the correction values
are displayed.
Figure 6: System parameter view
HYDAC Filtertechnik GmbH
en
Page 23
BeWa AS8000 3215331b en.doc 2007-07-12