Huvitz HPE-410, User Manual

Page: 15 / 168

15
HPE-410
•
When wrapping the machine, use recommended packaging and shock-absorbing
materials in order to prevent damage during the transportation.
• Be sure to use the standard accessories or tools provided together with the product for
the maintenance. Otherwise, it may cause the malfunction of the product.
•
When processing wheel dressing, be sure to use dressing sticks that fit each wheel.
The dressing stick should be replaced when its length becomes so short that you cannot
hold it easily.
• Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
•
Make sure that the power cord is the correct type that is required in your area. This
Device has a universal power supply that allows operation in either 100-120 Vac or 200-
240 Vac voltage areas (no user adjustment is required).
Power Cord Requirements :
For 100-120 Vac use
- UL style SV, SVT, SJ or SJT, 18AWG, 3 conductor
- One end with NEMA 5-15P min. 10A, 125V
- Other end IEC 60320 C13 max. 3 m long
For 200-240 Vac use - Plug end
- Cable H05VV-F 3G, min. 1.0 mm
2
- Other end (with appliance coupler connected to unit IEC 60320 C13), 3 m long
- CEBEC, DEMKO, KEMA, NEMKO, OVE, SEMKO, VDE, UTE, FEMKO
- Conductor Colors – brown, blue, green/yellow stripe
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
!
NOTE