111
HPE-410
6.10.3. Frame Change Procedure
①
Frame reader reads the lens which will be used in frame change. (when you hold the lens at pattern
holder, you must block the lens adaptor at optical center of lens)
②
The data will be registered to the job manager after the reading process is completed.
③
Start the job manager, select the frame change lens data in the waiting tab. And then register it as
the frame change lens.
④
Frame reader reads the pattern or frame.
⑤
Start the job manager, load the edging job and input the edging information.
⑥
In detail edging option, choose the frame change mode by touching the feeler icon.
⑦
Look at the frame change guideline displayed, and check if the edging shape can be processed.
⑧
Rest procedures are same with normal edging procedures.
ㅈ
In edger + auto-blocker environment, frame change lens is already blocked by auto blocker. So
you don't have to use frame change lens register function, just activate the frame change
mode, and then you can start edging.
!
NOTE
Summary of Contents for HPE-410
Page 1: ...PATTERNLESS EDGER HPE 410 USER MANUAL...
Page 149: ...149 HPE 410 8 4 6 Clamp You can check clamp Clamp test Clamp sensor state 1 2...
Page 166: ...166 10 3 Drawings of System 10 3 1 Drawings of Edger...
Page 167: ...167 HPE 410 10 3 2 Drawings of Blocker HMB 8000 10 3 3 Drawings of Blocker CBK 4000...