9
HPE-410
2.2.
Safety Symbols
The International Electrotechnical Commission (IEC) has established a set of symbols, which are listed
below.
This applies only to the instrument that has the certification symbol printed explicitly on the product label
or sticker.
I and O on power switch represent ON and OFF respectively.
This symbol identifies caution, risk of danger. Ensure you understand
the function of this control before using it. Control function is
described in the appropriate User’s or Service Manual.
Protective Earth Connection
Disposal of your old appliance
1.
When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European Directive
2002/96/EC.
2.
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3.
The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.
4.
For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Alternating Current
Summary of Contents for HPE-410
Page 1: ...PATTERNLESS EDGER HPE 410 USER MANUAL...
Page 149: ...149 HPE 410 8 4 6 Clamp You can check clamp Clamp test Clamp sensor state 1 2...
Page 166: ...166 10 3 Drawings of System 10 3 1 Drawings of Edger...
Page 167: ...167 HPE 410 10 3 2 Drawings of Blocker HMB 8000 10 3 3 Drawings of Blocker CBK 4000...
