15
Tuff Torq K61 Hydrostatic Transaxle
Fig. 43, Pump Shaft
Do not attempt to remove the press-fit Bearing
on the Pump Shaft unless it is damage or worn. Re-
moval could result in damage to the Bearing.
Pump Shaft Removal
1. Remove the Seal and discard. Replace with new a Seal
during reassembly.
(Fig. 42)
2. Remove the large internal Snap Ring and lift the Pump
Shaft from the Upper Case.
(Fig. 43)
Inspect the Shaft and its components for scor-
ing, pitting, discoloration, and other wear. Replace if
damage or worn. Inspect the Pump Shaft splines for
chipped or broken teeth.
Fig. 42, Pump Shaft Seal Removal