Husqvarna SM 50 / 2011, Workshop Manual

Page: 29 / 150

D.5
H02027
4
2
1
3
H02026
1
3
3
4
H02028
6
5
SETTINGS AND ADJUSTMENTS
Ed. 01-09-2010
Chain guard removal
Cut clips (1), and remove guard (2).
Cut clips (3), and remove sprocket guard (4).
Throttle cable adjustment
To check the correct adjustment of the throttle cable, operate as follows:
- move rubber cap (1) at cable end;
- push and pull cable (2) to make sure it has about 2 mm free play;
- if not so, loosen the lock ring nut (3) and suitably turn the adjuster screw (4)
(loosen to decrease play or tighten to increase it);
- tighten back the lock ring nut (3).
Operation with damaged throttle cable could result in an unsafe riding
condition.
Exhaust gas contains poisonous carbon monoxide. Never run the engine
indoors.
For a further adjustment, move rubber cap (6) aside, and turn carburettor screw
(5).