Husqvarna PP440HF, Workshop Manual, Page: 96 / 165

96
10.2 REPAIR INSTRUCTIONS
12
14
16
18
20
17
19
15
13
11� Connect the water connection to
the arm�
12� Apply grease to the three pins and
put them in place inside the shaft,
then insert the shaft�
13� Insert the arm with the water
connection and turn it into place�
14� Insert the bolt located at six a
clock�
15� Insert the bolt located at twelve a
clock� Make sure the X-ring is in
place and doesn’t get damaged�
16� Insert the remaining four bolts
without tighten them�
17� Turn the arm and loosen the two
locking screws on the cooler�
18� Turn the excenters until they
barely touch the Handle/Blade
Guard Mount�
19� Make sure the excenter is in
contact with the frame�
20� Tighten the locking screws�
WS482
11
WS482
WS482
WS482
WS482
WS482