Husqvarna PP440HF, Workshop Manual, Page: 85 / 165

10.2
85
REPAIR INSTRUCTIONS
2
3
5
7
9
4
6
8
10
1
Install the Gear Selector
(Only WS482)
1� Replace both O-rings on the gear
selector, grease it carefully and
insert it in the arm�
2� Insert one ball and the two
springs�
3� Use a pin punch to hold/press the
springs down and turn the gear
selector�
4� Place the ball in the hole�
5� Press the ball down with a pin
punch and turn back the gear
selector to make the ball fall into
place�
6� Now carefully turn the gear
selector back�
7� Turn the gear selector horizontally
and place the ball in the hole�
8� Insert the locking screw�
9� Turn the gear selector 180°,
unscrew the locking screw and
place the remaining ball in the
hole�
10� Insert the locking screw�
First see: Disassemble the Gear
Selector (Only WS482) (p.
84)
WS482
WS482 WS482
WS482 WS482
WS482
WS482 WS482
WS482
WS482