Husqvarna F2303U7, Owner'S Manual

Page: 78 / 171

12 SERVICE WORK ON THE CHASSIS
76
Main work
–
Check the throttle cable routing. ( p. 82)
H03706-11
–
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or
damaged.
H03704-11
–
Attach the fuel tank breather hose.
–
Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
(All EU models)
–
Position the horn with the horn bracket.
H03705-11
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
H03702-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 159)
–
Join quick release coupling
4
.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. ( p. 73)
–
Mount the seat. ( p. 68)