Husqvarna AUTOMOWER 105 Operator'S Manual Download Page 79

Page: 79 / 84

English - 79

11. GUARANTEE TERMS

11. Guarantee terms

Husqvarna AB guarantees this product's functionality

for a period of two years (from date of purchase). The

guarantee covers serious faults relating to materials or

manufacturing faults. Within the guarantee period, we

will replace the product or repair it at no charge if the

following terms are met:
•

The robotic lawnmower and the charging station

may only be used in compliance with the

instructions in this Operator's Manual.

•

Users or non-authorised third parties must not

attempt to repair the product.

Examples of faults which are not included in the

guarantee:
•

Damage caused by water seepage from

underneath the robotic lawnmower. This damage

is normally caused by laundry or irrigation

systems or holes/hollows in the working area

when pools of water are formed when it rains.

•

Damage caused by shortened low-voltage cable.

•

Damage caused by lightning.

•

Damage caused by incorrect battery storage or

handling.

•

Damage caused by using a battery that is not an

original battery.

•

Damage caused by not using Husqvarna AB

original spare parts and accessories, such as

blades and installation material.

•

Damage to the loop wire.

•

Damage to the body or its suspension caused by

improper storage.

The blades and wheels are seen as disposable and
are not covered by the guarantee.

If a fault occurs with your robotic lawnmower, please
contact the dealer (see Memo on page 4) for further
instructions. Please have your receipt and product
serial number to hand for quicker assistance.

Summary of Contents for AUTOMOWER 105





















































































Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands

Husqvarna AUTOMOWER 105, Operator'S Manual

Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands