English - 17
2. PRESENTATION
The control panel on the top of the robotic
lawnmower is where you manage all the robotic
lawnmower settings. Open the control panel cover by
pressing down the
STOP
button.
When the main switch is set to position
1
for the first
time, a start-up sequence begins which includes
language selection, time format, date format and the
four-digit PIN code and setting the time and date.
See
3.8 First start-up and calibration
on page 35.
After this, the selected PIN code must be entered
every time the main switch is set to
1
. See
6.5 Security
on page 52 for more information on
anti-theft protection.
Movement pattern
The movement pattern of the robotic lawnmower is
random and is determined by the robotic lawnmower
itself and depends on how the lawn looks. The mower
will not always drive in straight lines and a movement
pattern is never repeated. With this cutting system
the lawn is mown very evenly without any straight
mowing lines from the robotic lawnmower.
Locating the charging station
The robotic lawnmower moves in a random pattern
until it reaches the guide wire. Then the robotic
lawnmower follows the guide wire to the charging
station.
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the
working area or through a narrow passage to be then
connected with the boundary loop. For further
information, see
3.6 Installation of the guide wire
.
3012-983
3012-967
3012-969
Summary of Contents for AUTOMOWER 105
Page 1: ...HUSQVARNA AUTOMOWER 105 OPERATOR S MANUAL Omslag 105 US indd 1 2016 03 16 15 02 ...
Page 2: ......
Page 82: ......
Page 83: ......
