Husqvarna AUTOMOWER 105, Operator'S Manual

Page: 12 / 84

12 - English
2. PRESENTATION
2. Presentation
This chapter contains information that is important to
be aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves
four main components:
• A robotic lawnmower that mows the lawn by
essentially operating in a random pattern.
The robotic lawnmower is powered by a
maintenance-free battery.
• Charging station, where your robotic lawnmower
returns when the charge level in the battery
becomes too low.
The charging station has three functions:
• To send control signals along the boundary
wire.
• To send control signals along the guide wire so
that the robotic lawnmower can find the
charging station.
• To charge the robotic lawnmower battery.
• A power supply, which is connected between
the charging station and a 100-240 V wall
socket. The power supply is connected to the
wall socket and to the charging station using a
10 m long low voltage cable. The low voltage
cable must not be shortened or extended.
A longer low voltage cable is available as
optional accessory. Please contact your dealer
for more information. The appearance of the
power supply may differ depending on market.
• Loop wire, laid in a loop around the robotic
lawnmower’s working area. The loop wire is laid
around the edges of the lawn and around objects
and plants that the robotic lawnmower must not
run into. The loop wire is used both as a
boundary wire and a guide wire. The maximum
permitted length for the loop wire is 400m.
IMPORTANT INFORMATION
Loop wire for the boundary, pegs, connector
for the loop wire and couplers for the loop
wire are purchased in a separate Installation
kit. Always use genuine spare parts and
accessories.
3012-964
3012-965
3012-1352
3012-221