Husqvarna AUTOMOWER 105 Operator'S Manual Download Page 62 | Manualshive

Page: 62 / 84

Husqvarna AUTOMOWER 105 Operator'S Manual Download Page 62

62 - English

8. MAINTENANCE

8.4 Cleaning

It is important to keep the robotic lawnmower clean.
A mower with large amounts of grass stuck to it will not
cope as well with slopes. It is recommended to clean
using a brush.

Chassis and blade disc

1. Set the main switch in position

0

.

2. Wear protective gloves.
3. Lift the robotic lawnmower onto its side.
4. Clean the blade disc and chassis using e.g. a

dish brush.
At the same time, check that the blade disc
rotates freely in relation to the foot guard.
If long blades of grass or other objects find their
way in, these may impede the blade disc. Even
a slight braking effect leads to a higher
consumption of energy and longer mowing
times, and at the worst will prevent the mower
from being able to mow a large lawn. The blade
disk must be removed to carry out a more
thorough cleaning. If necessary, contact your
dealer.

IMPORTANT INFORMATION

Never use a high-pressure washer or even
running water to clean the robotic lawnmower.
Never use solvents for cleaning.

IMPORTANT INFORMATION

Working with dull blades gives a poorer
mowing result. The grass is not cut cleanly and
more energy is needed resulting in the robotic
lawnmower not mowing such a large area.

3018-062

3012-1023

3012-272

«
...
60
61
62
63
64
...
»

Summary of Contents for AUTOMOWER 105





















































































Reviews:

No comments