Husqvarna AUTOMOWER 105 Operator'S Manual Download Page 71

Page: 71 / 84

English - 71

9. TROUBLESHOOTING

9.2 Indicator lamp in the charging station

For a fully functional installation, the indicator lamp in the charging station must emit a solid green light.
If something else appears, follow the troubleshooting guide below.

There is more troubleshooting help on www.automower.com. If you still need help with troubleshooting,
please contact the local dealer.

Light

Cause

Action

Solid green light

Everything in order

No action required

Green flashing light

The signals are good and ECO mode
is activated.

No action required. For more
information on ECO mode, see

6.6 Settings

on page 54

Blue flashing light

The boundary wire is not connected
to the charging station

Check that the boundary wire
connector is fitted properly to the
charging station. See

3.5 Connecting

the boundary wire

on page 30.

Break in the boundary wire.

Find out where the break is. Replace
the damaged section of the boundary
wire with a new loop wire and splice
using an original coupler.

Yellow flashing light

The guide wire is not connected to
the charging station

Check that the guide wire connector
is properly connected to the charging
station. See

3.6 Installation of the

guide wire

on page 31.

Break in the guide wire

Find out where the break is. Replace
the damaged section of the guide
wire with a new loop wire and splice
using an original coupler.

Red flashing light

Interruption in the charging station's
antenna

Contact the local dealer.

Solid blue light

Weak signal as the boundary wire is
too long.

No steps have to be taken if the
mower operates as expected.

Shorten the boundary wire by
reducing the working area or
replacing islands with barriers the
mower can collide with.

Solid red light

Defective circuit board in the charging
station

Contact the local dealer.

Summary of Contents for AUTOMOWER 105





















































































Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands

Husqvarna AUTOMOWER 105, Operator'S Manual

Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands