Husqvarna AUTOMOWER 105 Operator'S Manual Download Page 19

Page: 19 / 84

English - 19

3. INSTALLATION

• Low voltage cable (26)

• Pegs (19)

• Connector for connecting the loop wire to the

charging station (18)

• Screws for the charging station (21)

• Measurement gauge (26)

• Couplers for the loop wire (20)

During installation you will also need:

• Hammer/plastic mallet (to simplify putting the

pegs in the ground).

• Combination pliers for cutting the boundary

wire and pressing the connectors together.

• Polygrip (for pressing the couplers together).

• Edge cutter/straight spade if the boundary wire

must be buried. Installation of the charging
station.

3.2 Installation of the charging
station

Ideal position for the charging station

Take the following aspects into consideration when
identifying the best location for the charging station:

• Allow for 3 metres of free space in front of the

charging station.

• It must be possible to lay at least 1.5 metres of

boundary wire straight out to the right and left
of the charging station.

• It must be close to a wall socket The supplied

low voltage cable is 10 metres long.

• A level surface to place the charging station

on.

• Protection from water spray for instance from

irrigation.

• Protection from direct sunlight.

• Place in the lower part of a working area that

has a major slope.

For an example of an ideal position of the charging
station, see

7. Garden examples

on page 56.

3012-1311

3018-072

Summary of Contents for AUTOMOWER 105





















































































Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands

Husqvarna AUTOMOWER 105, Operator'S Manual

Search results

Summary of Contents for AUTOMOWER 105

Reviews:

Related manuals for AUTOMOWER 105

Brands by name

Popular brands