Husqvarna AUTOMOWER 105, Operator'S Manual

Page: 64 / 84

64 - English
8. MAINTENANCE
8.7 Blades
There are three blades on the robotic lawnmower,
which are screwed into the blade disc. All three blades
and screws must be replaced at the same time to
obtain a balanced mowing system.
Use Husqvarna genuine blades only.
To replace the blades:
1. Set the main switch in position 0 .
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its holes align with
the screw for the blade.
5. Remove the 3 screws. Use a straight slot or
cross-tip screwdriver.
6. Remove the blade and the screw.
7. Screw on the new blade and the new screw.
8. Check also that the blade can pivot freely.
WARNING
Always use original blades and screws
when replacing. Only replacing the
blades and reusing the screw can result
in a screw wearing during mowing and
shearing. The blades can then be
propelled from under the body and
cause serious injury.
3012-1023
3012-272
3018-087