HunterDouglas Pirouette PowerView, Installation Operation Care

Page: 26 / 32

CARE
24
Removing the Shading
■ ■
Fully raise the shading.
■ ■
If your shading is powered by the satellite battery pack, C-size battery wand, or 18V DC
Power Supply, disconnect the extension cable from the power source.
■ ■
Move each lever of the installation brackets to
the left to release the shading.
■ ➤
A flat blade screwdriver can be used to
move the lever.
CAUTION: Be very careful not to tear or
damage the fabric.
■ ➤
If the lever is inaccessible or inoperable,
lower the shading until you can see
the underside of the bracket.
Carefully reach a small flat blade
screwdriver behind the shading to
the tab on bottom of the bracket
between the screw holes.
■ ➤
Push the tab away from the
shading and pull the headrail to
release it from the bracket.
■ ■
Carefully pull the shading to remove
it from the brackets.
Cleaning Procedures
Pirouette
®
Window Shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the sheer backing fabric.
CAUTION: Do not steam Pirouette fabrics.
Fabric-Covered Headrail
■ ■
Lightly dust with a clean, dry cloth, vacuum using low suction, or spot clean with a damp
cloth and mild detergent.
Dusting
■ ■
Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Top View
Move Lever to Left
Tab
Installation Bracket
Underside of
Bracket
End Cap