HunterDouglas Pirouette PowerView, Installation Operation Care

Page: 21 / 32

OPERATION
19
Problem Adjacent shadings do not roll up evenly.
Solution
It is considered normal if the roll-up on both shadings is within
5
⁄
16
" of each
other. If one shading rolls up tighter than another, repeatedly lower and raise
both shadings.
Check that the shading fabric is not catching on any brackets or components.
Check that the fabric winds evenly and does not rub against the headrail. If
uneven, see “Adjusting the Bottom Rail Weight” on page 23.
Problem The vanes do not close completely. They stay contoured and do not flatten.
Solution Toggle the vanes open and closed, then coax the vanes as closed as possible.
If necessary, gently pull down on the lowest operable vane. You may also
gently dress the vanes with your hands to help them close. Then roll up the
shading slowly to flatten the vanes. Allow the fabric to remain in the headrail
for up to 24 hours.
To avoid this in the future, regularly “exercise” the shading by raising and
lowering it and opening and closing the vanes.