Hunt HVR-16E, Installation Manual

Page: 68 / 75

#3. Additional information of VGA support model
3.1. A Figure of VGA/COM1 terminal
In case of mode at the curren , 9-pin port (RS-232, CO ged to 15-
pin port (VGA C ). The output figure b connector is shown as belo .
This new VGA l support VGA output wit g COM1 port.
#
supporting VGA t HVR 1600D M1) chan
onnector of 15-pin D-Su w
mode hout removin
#3.2. Configuring serial port for Pan/Tilt/Zoom
In case of supporting DS1600 Series through COM1 port, it is possible to control P/T/Z by connecting
PTZ device.
Please refer to the below diagram and
“9.3 Connecting Serial Port”
on page 32 to connect with other
evices.
In c necting or removing a wire, please refer to
“<Note> Wire Handling”
on page 27.
d
ase of con
A Diagram of serial port
68