Hunt HVR-16E, Installation Manual

Page: 22 / 75

8.2. Setting Date & Time
(1) Press [MENU] button, and select “Quick Setup” tab.
(2) Select “Date/Time” and enter the Settings Page by pressing [ENTER].
8.2.1. Time zone
(1) Select “Time Zone” and press [ENETR] button to configure.
(2) Select a value using the [ ◄ / ► ] button and press the [EXIT] button when finished.
8.2.2. Daylight saving
(1) “Daylight Saving Time” is only activated for time zones that use Daylight Savings. If activated, press
[ENTER] to enter a new value.
(2) Select “On/Off” using the [ ◄ / ► ] button and press the [EXIT] button when finished.
8.2.3. Sync with NTP
In order to synchronize time with NTP (Network Time Protocol) server, select “On”.
(1) Select “Sync with NTP” using the [ ◄ / ► ] or the [
▲
/
▼
] buttons and press [ENTER] button.
(2) Select “On/Off” using the [ ◄ / ► ] button and press the [EXIT] button.
22