Hunt HVR-16E, Installation Manual

Page: 37 / 75

9.5. Connecting USB device
USB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connecting
USB device, do not exceed the rated values of USB device.
USB Spec. Ver 1.1 (Max 12M bps)
Available Device USB Memory Stick,
Output Voltage/Current Max. 200mA per DC 5V / Port
<Note>
The disk should be formatted with FAT32 type.
as in the following picture. To copy images,
p to 1 minute) Æ Select drive Æ Copy (press “Start”).
If properly connected, the disk is recognized automatically
the process is as follows: Set copy range (u
<Note>
1. USB Flash products that require a Windows program to operate may not be recognized by the HVR.
For more information about copy function, please refer to the “
HVR User’s Guide
2. ”.
37