Hunt HVR-16E, Installation Manual

Page: 17 / 75

6. Setting remote controller
6.1. Setting ID of HVR-16E
When controlling several HVRs (HVR-04, HVR-08, DS1600 series) with one remote controller, set
Remote Control ID as follows.
(1) Press the [MENU] button.
(2) Select “System” with using [ ► ] button and press the [ENETR] or [ ▼ ] button.
(3) Select “Miscellaneous” from the sub-menu list using the [
▼
] button and press the [ENETR] button.
(4) Select “Remote Control ID,” and press the [ENETR] button.
(5) Select a value using the [ ◄ / ► ] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 HVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”.
17