Hunt HVR-16E, Installation Manual

Page: 18 / 75

6.2. Selecting HVR-16E
If several HVRs are set with unique ID numbers, they can be controlled with one remote controller. To
select a specific HVR(HVR-16E), keep pressing the ID button of remote controller until a buzzer sounds
during 2 seconds.
<Note>
Because remote controller ID is sixteen, HVR will correspond until pressing ID button sixteen times.
6.3. Operable range of remote controller
6.4. Loading the batteries into remote controller
Remote controller requires two AAA-type batteries.
1. Remove the battery cover.
2. Taking care that the poles(+/-)
are correctly positioned.
3. Replace the battery cover.
<Note>
Batteries are not included as a packing accessory.
18