3
Basic Operations
3.3 Removing the Server and Guide Rails
3.4 Removing the Chassis Cover
3.5 Installing the Chassis Cover
3.7 Removing Cables from a PSU
3.10 Removing the Built-in Drive Assembly
3.11 Installing the Built-in Drive Assembly
3.12 Removing a Riser Card Tray
3.13 Installing a Riser Card Tray
3.1 Powering On the Server
Power on the server using one of the following methods based on the actual situation:
l
If the PSUs are properly installed but are not connected to an external power supply,
power on the server as follows:
Connect the external power supply to the PSUs. Then the server will power on with the
PSUs.
NOTE
The default value of
System State Upon Power Supply
is
Power on
, which indicates that the
server automatically powers on after power is supplied to the PSUs. To change the value of
System State Upon Power Supply
, log in to the iBMC WebUI and choose
Power
>
Power
Control
.
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
40