Figure 5-54
Installing a DIMM
Step 10
Install the air duct or the built-in drive assembly. For details, see
or
3.11 Installing the Built-in Drive Assembly
Step 11
Install the chassis cover. For details, see
3.5 Installing the Chassis Cover
Step 12
Install the server. For details, see
4.4 Installing the Server on Guide Rails
.
Step 13
Connect the power cables. For details, see
Step 14
Power on the server. For details, see
Step 15
Use the Toolkit to perform a stress test on the new DIMM. For details, see the
.
Step 16
Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
Huawei Rack Server iBMC User Guide
----End
5.14 TPM/TCM
The server supports Trusted Platform Module (TPM) 2.0 and Trusted Cryptography Module
(TCM).
Note that:
l
If the key function of the TPM/TCM is used to encrypt data, back up the data before
removing the TPM/TCM. If no backup is available, the encrypted data cannot be
decrypted after the TPM/TCM is replaced.
l
Before removing the TPM/TCM, check whether some TPM/TCM functions have been
set on the BIOS. If yes, you need to set these functions again after replacing the TPM/
TCM. For details, see the
Huawei Server Purley Platform BIOS Parameter
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
163