Step 5
Take a spare drive out of its ESD bag.
Step 6
Fully open the ejector lever and push the drive into the chassis along the guide rails as far as it
will go. See (1) in
.
Figure 5-8
Installing a drive
Step 7
Ensure that the ejector lever is fastened to the chassis beam, and then close it to completely
insert the drive into the chassis. See (2) in
Step 8
If the drive is to be installed in the built-in drive module, perform the following operations:
1.
Close the handles of the built-in drive module. See
.
Figure 5-9
Closing the handles of the built-in drive module
2.
Install the chassis cover. For details, see
3.5 Installing the Chassis Cover
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
119