Step
Action
Configure RAID.
Configure RAID for the server. For details, see the
Server RAID Controller Card User Guide
Configure the BIOS.
Configure the server BIOS, including setting the boot option
priority and BIOS password.
Install an OS.
Install an OS for the server.
4.6.3 Setting the Management Network Port IP Address
You can set the IP address using any of the following methods:
Using the iBMC WebUI
For details, see the
Huawei Rack Server iBMC User Guide
Using the iBMC CLI
For details, see the
Huawei Rack Server iBMC User Guide
Using the BIOS
Step 1
Log in to the Remote Virtual Console. For details, see
.
Step 2
On the Remote Virtual Console, click
or
on the menu bar.
Step 3
Choose
Reset
.
The system displays "Are you sure to perform this operation?"
Step 4
Click
Yes
.
The server restarts.
Step 5
When information shown on the following screen is displayed, press
Delete
or
F4
to access
the BIOS setup utility.
NOTE
l
To go to the Front Page, press
F11
or
F3
.
l
To go to PXE, press
F12
.
l
To go to the Smart Provisioning GUI, press
F6
.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
95