Port
Type
Quantit
y
Description
Management
network port
1000BASE-T
1
The 1000 Mbit/s Ethernet port is used for
server management.
USB port
USB 3.0
2
The USB ports allow USB devices to be
connected to the server.
NOTE
Before connecting an external USB device,
check that the USB device functions properly. A
server may operate abnormally if an abnormal
USB device is connected.
PSU socket
-
2
Determine the number of PSUs based on
actual requirements, but ensure that the
rated power of the PSUs is greater than that
of the server. When one PSU is used,
Predicted PSU Status
cannot be set to
Active/Standby
on the iBMC WebUI.
Table 2-5
LOM port description
LOM Port
Chip Model
Rate
Negotiation
Mode
Supported
Rate
Not
Supported
Rate
10GE optical
port
X722
Auto-
negotiation
10000 Mbit/s
(full duplex)
10000 Mbit/s
10/100/1000
Mbit/s
10GE electrical
port
Auto-
negotiation
1000 Mbit/s
(full duplex)
1000 Mbit/s
10/100 Mbit/s
Auto-
negotiation
10000 Mbit/s
(full duplex)
10000 Mbit/s
10/100 Mbit/s
GE electrical
port
Auto-
negotiation
1000 Mbit/s
(full duplex)
1000 Mbit/s
10/100 Mbit/s
NOTE
l
The LOM ports do not support forcible rates.
l
The GE LOM electrical port does not support SR-IOV.
2288H V5 Server
User Guide
2 Components
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
11