Figure 5-42
Installing the other edge of a CPU
Step 13
Release the CPU carrier so that the other edge of the CPU clips into place.
Step 14
Check that the CPU is securely installed and level with the carrier. Press down to secure any
raised parts.
Step 15
Determine the area on the CPU that will be in contact with the heat sink, and use a clean blade
or card to evenly paste 0.4 ml of thermal compound on the area.
NOTE
The thermal compound injector has volume marks.
shows six methods for pasting thermal compound. Dual-line, five-point, S-
shaped, and cross pasting methods are recommended.
Figure 5-43
Pasting methods
The thermal compound layer is as thick as a piece of common paper.
shows the
smeared thermal compound layer. Ensure that the thermal compound is evenly and fully
painted.
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
150