Huawei V100R005 User Manual Download Page 283

Page: 283 / 294

Step 5

In the navigation tree, choose

Session

Step 6

Set the login parameters.

The parameters are described as follows:

Host Name (or IP address)

: Enter the IP address of the server to be accessed, for

example,

191.100.34.32

Port

: Retain the default value

Connection type

: Retain the default value

SSH

Close window on exit

: Retain the default value

Only on clean exit

NOTE

Configure

Host Name (or IP address)

and

Saved Sessions

, and click

Save

. You can double-click the

saved record under

Saved Sessions

to log in to the server the next time.

Step 7

Click

Open

The

PuTTY

window is displayed.

NOTE

If this is your first login to the server, the

PuTTY Security Alert

dialog box is displayed. Click

Yes

proceed.

Step 8

Enter the user name and password.

NOTE

If an incorrect user name or password is entered, you must set up a new PuTTY session.

If the login is successful, the server host name is displayed on the left of the prompt.

----End

2288H V5 Server
User Guide

14 Common Operations

Issue 04 (2018-09-04)

274

Summary of Contents for V100R005







































































































































































































































































































Search results

Summary of Contents for V100R005

Reviews:

Huawei V100R005, User Manual, Page: 283 / 294

Search results

Summary of Contents for V100R005

Reviews: