Step 2
Power off the server. For details, see
Step 3
Remove the power cables. For details, see
3.7 Removing Cables from a PSU
.
Step 4
Remove the server. For details, see
3.3 Removing the Server and Guide Rails
.
Step 5
Remove the chassis cover. For details, see
3.4 Removing the Chassis Cover
.
Step 6
Take a spare drive module out of its ESD bag.
Step 7
Install the rear drive module in the chassis, and tighten the screws. See
Figure 5-60
Installing a two-slot drive module
Step 8
Install all drives in the drive module.
Step 9
Connect cables to the drive module. For details, see
.
Step 10
Install the chassis cover. For details, see
3.5 Installing the Chassis Cover
Step 11
Install the server. For details, see
4.4 Installing the Server on Guide Rails
.
Step 12
Connect the power cables. For details, see
Step 13
Power on the server. For details, see
Step 14
Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
Huawei Rack Server iBMC User Guide
----End
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
170