Huawei TaiShan 200 23280 User Manual Download Page 4

Page: 4 / 191

Symbol

Description

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,

data loss, performance deterioration, or

unanticipated results.
NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the

main text.
NOTE is used to address information not related

to personal injury, equipment damage, and

environment deterioration.

Change History

Issue

Date

Description

2021-01-12

Added 1711 iBMC card information.

2020-08-14

● Added information about servers that

use Kunpeng 920 7265 or 5255

processors.

● Added the server with 8 x 2.5" drives.

2020-06-29

Added the "Powered by Kunpeng" label

on the front panel.

2020-04-15

● Updated the memory specifications of

servers with Kunpeng 920 5220 or

3210 processors.

● Updated the L3 cache capacity of

servers with Kunpeng 920 5220 or

3210 processors.

2020-03-03

Modified the description of power

consumption.

2020-01-16

● Added information about servers that

use Kunpeng 920 5220 or 3210

processors.

● Added information about the WebUI

of iBMC V561 and later versions.

2019-12-17

Added the server with 24 x 2.5" SAS/

SATA pass-through drives.

TaiShan 200 Server (Model 2280)

User Guide

About This Document

Issue 09 (2021-01-12)

iii

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands