Huawei TaiShan 200 23280 User Manual Download Page 42

Page: 42 / 191

Item

Specifications

Kunpeng 920 5255 processor

● The server supports two 48-

core 3.0 GHz processors.

● The L3 cache is 48 MB.

Kunpeng 920 5220 processor

● The server supports two 32-

core 2.6 GHz processors.

● The L3 cache is 32 MB.

Kunpeng 920 3210 processor

● The server supports two 24-

core 2.6 GHz processors.

● The L3 cache is 24 MB.

Storage

Drive:
● Support for a variety of drive configurations. For details, see

Table 2-9

● Hot swap of a single drive.
RAID controller card:
● Support for a variety of RAID controller cards. Use the

Computing Product Compatibility Checker

to obtain

information about the specific RAID controller cards

supported.

● Supercapacitor to protect cache data from power failures,

and support for RAID level migration, drive roaming, self-

diagnosis, and web-based configuration. For details about

the RAID controller card, see the

TaiShan Server RAID

Controller Card User Guide

FlexIO card

A maximum of two FlexIO cards. A FlexIO card can provide

either of the following network ports:
● Four GE electrical ports, supporting PXE
● Four 25GE/10GE optical ports, supporting PXE

NOTE

Different optical modules can be used to support 25GE or 10GE

optical port rate.

TaiShan 200 Server (Model 2280)

User Guide

3 Product Specifications

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands