Huawei TaiShan 200 23280 User Manual Download Page 69

Page: 69 / 191

Figure 5-18 Securing a power cable

Step 4 Insert the other end of the power cable into the AC power socket on the cabinet.

The AC power socket is located horizontally at the rear of the cabinet. Select a

jack on the power socket for connection.

Step 5 Bind the power cable to the CMA using cable ties.

----End

5.8.7.2 Connecting DC PSU Cables

NO TICE

● Use dedicated power cables to ensure equipment and personal safety.
● Use power cables only for dedicated servers. Do not use them for other devices.
● Connect the power cables of the active and standby PSUs to different power

distribution units (PDUs) to ensure reliable system operation.

● Ground the equipment before powering it on.

Procedure

Step 1 Wear an ESD wrist strap. For details, see

5.3 ESD Protection

Step 2 Take the spare part out of its ESD bag.

Step 3 Connect the power cables to the PSUs.

1. Put the OT terminal (for the ground cable) on the screw removed from the

ground hole, install the screw on the ground hole, and tighten the screw. See

(1) in

Figure 5-19

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands