Huawei TaiShan 200 23280 User Manual Download Page 58

Page: 58 / 191

Figure 5-7 Installing the server

3. When the two mounting ears of the server come into contact with the

mounting bars on the cabinet, tighten their captive screws to secure the

server. See (2) in

Figure 5-7

Step 4 Connect the power cables, network cables, VGA cable, and USB device as required,

and power on the server.

----End

5.7.2 Installing with Adjustable Guide Rails

Adjustable guide rails are for a cabinet with a depth of 543.5 mm to 848.5 mm

(21.40 in. to 33.41 in.) between the front and rear mounting bars.
The servers are stackable onto adjustable guide rails.

Step 1 Install the adjustable guide rails.

1. Position a guide rail horizontally in contact with the mounting bars and hook

it onto the cabinet. See (1) in

Figure 5-8

NO TE

The three holes in each mounting ear of a guide rail should be within 1U boundary

lines.

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands