Huawei TaiShan 200 23280 User Manual Download Page 81

Page: 81 / 191

Figure 5-29 Querying alarm information (iBMC V549 or earlier)

▪

If the iBMC version is V561 or later, view Alarm Statistics on the

Home page, as shown in

Figure 5-30

Figure 5-30 Querying alarm information (iBMC V561 or later)

d. Clear any alarms if present. For details, see the

TaiShan Rack Server

iBMC Alarm Handling

●

Check the server using the iBMC CLI.
a. Set an IP address for the PC. This IP address must be on the same

network segment as the iBMC management network port.

b. Connect a network cable from the PC to the iBMC management network

port of the server.

Start a Secure Shell (SSH, PuTTY), tool on the PC and log in with the IP

address of the iBMC management network port and iBMC user name and

password.

NO TE

By default, SSH is used to log in to the iBMC. If the SSH service is disabled,

enable it by choosing Configuration > Services on the iBMC WebUI.

d. Run the ipmcget -d ver command to view the server version information.

Check that the server versions meet site requirements.

iBMC:/->ipmcget -d ver

------------------- iBMC INFO -------------------

IPMC CPU: Hi1710

IPMI Version: 2.0

CPLD Version: (U6076)1.00

Active iBMC Version: (U68)3.32

Active iBMC Build: 003

Active iBMC Built: 14:32:33 Apr 15 2019

Backup iBMC Version: 3.32

SDK Version: 3.26

SDK Built: 10:53:30 Mar 18 2019

Active Uboot Version: 2.1.13 (Dec 24 2018 - 20:23:20)

Backup Uboot Version: 2.1.13 (Dec 24 2018 - 20:23:20)

----------------- Product INFO -----------------

Product ID: 0x0001

Product Name: XXXX

iME Version: 0.66

BIOS Version: (U75)0.90

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands