Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-24
Field
Description
Intf Addr
IP address of the interface to the next hop
Intf Name
The interface to the next hop
3.1.22 display ospf peer
Syntax
display ospf
[
process-id
]
peer
[
brief
]
View
Any view
Parameter
process-id
: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using
display ospf peer
command, you can view the information about OSPF peer.
Using
display ospf peer brief
command, you can view the brief information of every
peer in OSPF, mainly the peer number at all states in every area.
Example
# View the information of OSPF peer.
<Quidway> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 10.153.17.88(Vlan-interface1)'s neighbor(s)
RouterID: 2.2.2.2 Address: 10.153.17.89
State: Full Mode: Nbr is Master Priority: 1
DR: 10.153.17.89 BDR: 10.153.17.88
Dead timer expires in 31s
Neighbor has been up for 01:14:14
Table 3-10
Description of information generated by the command display ospf peer
Field
Description
RouterID
Router ID of neighbor router
Address
Address of the interface, through which neighbor
router communicates with the router
State
State of adjacency relation