manualshive.com logo in svg

Huawei Quidway S6500 Series, Command Manual

Share
Download
Huawei Quidway S6500 Series Command Manual Download Page 485

Command Manual - QoS/ACL 
Quidway S6500 Series Ethernet Switches 

Chapter 2  Qos Command

 

Huawei Technologies Proprietary 

2-30 

Parameter 

inbound

: Performs traffic limitation to the packets received by the interface. 

outbound

: Performs traffic limitation to the packets sent by the interface. 

ip-group 

{ 

acl-number

 | 

acl-name

 } [ 

rule rule

 ]: the basic or advanced ACLs; 

acl-number

: the sequence number of ACLs, ranging from 2000~3999; 

acl-number

: the 

name of ACLs, character string, which must be started with an English letter (i.e., a-z or 
A-Z), and there should not be a space or quotation mark in it; 

rule rule

: (Optional) 

specifies a subitem of an ACL, ranging from 0 to 127, it represents all the subitems of 
the ACL if not specified. 

link-group 

{ 

acl-number

 | 

acl-name

 } [ 

rule rule 

]: The Layer 2 ACL; 

acl-number

: the 

sequence number of an ACL, ranging from 4000~4999; 

acl-name

: the name of an ACL, 

character string, which must be started with an English letter (i.e., a-z or A-Z), and there 
should not be a space or quotation mark in it; 

rule rule

: (Optional) specifies the subitem 

of an ACL, ranging from 0 to 127, it represents all the subitems of the ACL if not 
specified. 

user-group 

{ 

acl-number

 | 

acl-name

 }: activate the user-defined ACL. 

acl-number

: 

Specifies the ACL number, ranging from 5000 to 5999. 

acl-name

: Specifies the ACL 

name with a character string started with English letters (that is [a to z, A to Z]), 
excluding space and quotation marks.  

kbps

: Specifies the traffic limit to kbps. In this approach, the rate is in kbps and the 

granularity can be as low as 64 kbps. 

target-rate

: The set normal traffic, as for the LS82GP20 and LS82GT20 interface cards, 

the value ranges from 1 to 1000, in Mbps; as for other types of interface cards, the unit 
is kpbs, the value ranges from 64 to 8388608 and must be the multiple of 64k. 

exceed

 

action

: (Optional) The action taken when the traffic exceeds the threshold. Only 

LS82GP20 and LS82GT20 interface cards support this parameter. The 

action

 can be: 

z

 

drop

: Drops the packets. 

z

 

remark-dscp value: Sets new DSCP value. 

Description 

Using the 

traffic-limit 

command, you can activate ACL and perform traffic limitation. 

Using the 

undo traffic-limit 

command, you can

 

remove

 

traffic limitation. 

This command performs traffic limitation to the packets that match with specified ACL 
rule, and is only effective to the 

permit

 rule. 

Summary of Contents for Quidway S6500 Series














































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands