Command Manual - System Management
Quidway S6500 Series Ethernet Switches
Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-12
View
System view
Parameter
groupname
: Group name, ranging from 1 to 32 bytes.
authentication
: Configure to authenticate the packet without encryption.
privacy
: Configure to authenticate and encrypt the packet.
read-view
: Configures to allow read-only view settings.
readview
: Read-only view name, ranging from 1 to 32 bytes.
write-view
: Configure to allow read-write view settings.
writeview
: The name of read-write view, ranging from 1 to 32 bytes.
notify-view
: Configure to allow notify view settings.
notifyview
: Specify the notify view name, ranging from 1 to 32 bytes.
acl
acl-list
:Set access control list for this group name.
Description
Using
snmp-agent group
command, you can configure a new SNMP group, that is, to
map SNMP user to SNMP view. Using
undo snmp-agent group
command, you can
cancel a specified SNMP group.
For the following reasons:
z
snmp-agent target-host
command automatically generates a
notifyview
for user
and adds it to the corresponding group.
z
Any change of the SNMP group notify view will affect all the users related to this
group.
Please do not specify the notify view when configuring SNMP group.
Example
# Create an SNMP group named hello.
[Quidway] snmp-agent group v3 hello.
5.1.14 snmp-agent mib-view
Syntax
snmp-agent mib-view
{
included
|
excluded
}
view-name
oid-tree
undo snmp-agent mib-view view-name
View
System view
