Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-10
Field
Description
Uptime
Time passed since the multicast group has been discovered
Expires Specifies
when
the member will be removed from the group
5.1.11 display pim routing-table
Syntax
display pim routing-table
[ { {
*g
[
group-address
[
mask
{
mask-length
|
mask
} ] ] |
**rp
[
rp-address
[
mask
{
mask-length
|
mask
}
] ] } | {
group-address
[
mask
{
mask-length
|
mask
} ] |
source-address
[
mask
{
mask-length
|
mask
} ] }
*
} |
incoming-interface
{
interface-type interface-number
|
null
} | {
dense-mode
|
sparse-mode
} ]
*
View
Any view
Parameter
**
rp
: (*, *, RP) route entry.
*
g
: (*, G) route entry.
group-address
: Address of the multicast group.
source-address
: IP address of the multicast source.
incoming-interface interface-type interface-number
: Route entry with the specified
incoming interface.
null
: Specifies the incoming interface type as Null.
dense-mode
:
Specifies the multicast routing protocol as PIM-DM.
sparse-mode
:
Specifies the multicast routing protocol as PIM-SM.
Description
Using
display pim routing-table
command, you can view the contents of the PIM
multicast routing table.
For the related command, see display multicast routing-table.
Example
# View the contents of the PIM multicast routing table on the router.
<Quidway> display pim routing-table
PIM-SM Routing Table
Total 0 (*,*,RP)entry, 0 (*,G)entry, 2 (S,G)entries
