Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-28
Description
Using the
md5-compatible
command, you can set the IS-IS to use the MD5 algorithm
which is compatible with that of the other vendors. Using the
undo md5-compatible
command, you can return to the defaults.
By default, the system uses the MD5 algorithm in IS-IS which is compatible with that of
Huawei.
You must configure this command when the switch needs to authenticate the devices of
other vendors using MD5 algorithm in IS-IS.
Example
# Set the IS-IS to use the MD5 algorithm compatible with that of the other vendors
[Quidway-isis] md5-compatible
4.1.33 network-entity
Syntax
network-entity
NET
undo
network-entity
NET
View
IS-IS view
Parameter
NET
: Specify the Network Entity Title in the X…X.XXXX....XXXX.00 format, in which
the first “X…X” is the area address, the twelve Xs in the middle is the System ID of the
router, and the 00 in the end is SEL.
Description
Using
network-entity
command, you can configure the name of Network Entity Title
(NET) of the IS-IS routing process. Using
undo network-entity
command, you can
delete a NET.
By default, the value is No NET.
NET means the Network Service Access Point (NSAP). It consists of three parts. Part
one is area ID, which is variable (1 to 13 bytes), and the area IDs of the routers in the
same area are identical. Part two is system ID (6 bytes) of this router, which must be
unique in the whole area and backbone area. Part three, the last byte “SEL”, whose
value must be “00”. So the NET field of IS-IS is 8 to 20 bytes. Usually, one router can be
configured with one NET. When the area is redesigned by combination or separation,
after reconfiguration, the correctness and continuity of the routes must be ensured.
For the related commands, see
isis, isis enable
.
