Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 ARP Configuration Commands
2.1 ARP Configuration Commands
2.1.1 arp check enable
Syntax
arp check enable
undo arp check enable
View
System view
Parameter
None
Description
Using
arp check enable
command, you can enable the checking of ARP entry, that is,
the device does not learn the ARP entry where the MAC address is multicast MAC
address. Using
undo arp check enable
command, you can disable the checking of
ARP entry, that is, the device learns the ARP entry where the MAC address is
multicast MAC address.
By default, the checking of ARP entry is enabled, that is, the device does not learn the
ARP entry where the MAC address is multicast MAC address.
Example
# Configure that the device learns the ARP entry where the MAC address is multicast
MAC address.
[Quidway] undo arp check enable
2.1.2 arp static
Syntax
arp static ip-address mac-address
[
vlan-id
{
interface_type interface_num |
interface_name
} ]
undo arp ip-address
View
System view